The Marson BT-8 is a battery-powered rivet-nut installation tool designed to deliver reliable pull-force for high-volume assembly applications. See this product at The ASSEMBLY Show, booth 1223. Options include a sensor for detecting when the spindle is in work position a workpiece detection device a probe arm and probe and an automatic spindle lubrication system with lubricant level monitor. It has two-hand control switch, a time-based control, and an adjustable task light. It can form rivets up to 12 millimeters in diameter. Riveting force ranges from 5.67 to 17 kilonewtons, and stroke length ranges from 5 to 40 millimeters. Model RN281-RC3 is an electropneumatic benchtop radial riveting machine. See this product at The ASSEMBLY Show, booth 351. A feeder bowl automatically reloads the collar feeding tube in less than 1 minute. Next, the feeder automatically returns to its original position for the next lockbolt installation. The feeder pivots, exposing the nose for installation, while picking up next collar. The operator presents the nose to the pintail, and a feeder dispenses a collar on the pin. The Feed-n-Swage is a semiautomatic tool for installing LPG lockbolts. See this product at The ASSEMBLY Show, booth 1139. A built-in mandrel collection system vacuums up all disposed nails. For even greater efficiency, an adjustable vacuum system minimizes air consumption based specifically on the size of the rivet being set. Operators don’t need to focus on picking, placing and keeping the rivet in the nose of the gun. The tool’s ergonomically balanced design and one-touch operation allows users to set rivets automatically. The tool is more economical than bowl fed, blow feed or pick-and-place systems, since it has fewer parts and needs less air to operate. The tool accommodates up to 100 rivets per coil, and only eight seconds are needed to changeover between strips. It takes two seconds to install a rivet and feed the next fastener on the strip automatically. The tool can even install rivets in a downward position for 360-degree flexibility. It can set most 1/8- and 5/32-inch rivets in any material, as well as certain 3/16-inch blind rivets. The tool can apply rivets of many sizes with minimal changeover time. This portable tool can be suspended horizontally or vertically. Automatic feeding enables the operator to align workpiece holes with one hand while riveting with the other, which saves time. The KingSet is a handheld autofeed tool for installing break-stem rivets. See this product at The ASSEMBLY Show, booth 1717. Control is carried out by a standard Siemens PLC, which manages programs and machine signals and tells the servomotors the exact location of each riveting operation. Users can create, copy, edit and delete riveting programs without having specific programming knowledge. The electrical cabinet is narrower and more accessible than previous models, and the keypad and control screen are closer and more accessible to the operator. The enclosure has removable panels for better accessibility for maintenance. See this product at The ASSEMBLY Show, booth 442.Īvailable with two or three servo-controlled axes, the RA-NCD CNC-controlled riveting machine can automatically head multiple rivet points, in sequence, at various heights and locations.įlexible, robust, ergonomic and easy to program, the machine is equipped with AGME’s fourth-generation RA-UC series riveting head.
0 Comments
Leave a Reply. |